Agency Official Strategies Manual

IEYTD 3 | Mission 3

"Blind Spot"

Objectives

Objective 1 Access the autopilot module Objective 2 Access your acceleration Objective 3 Access your steering Objective 4 Remove the truck’s first fuse Objective 5 Remove the truck’s second fuse Objective 6 Remove the truck’s last fuse Objective 7 Open the truck Objective 8 Protect your car Objective 9 Stop the explosion

Objective 1

Access the autopilot module

Hint 1

This car is running on autopilot, there must be a way around it. Maybe the glove box has something in it.

Hint 2

The glove box is locked—where could there be a key?

Solution

Get the key from the coin tray to the left of the steering wheel, and unlock the glove box to get a screwdriver and wire cutters. Use the screwdriver to unscrew four screws on the center panel.

Objective 2

Access your acceleration

Hint 1

All these wires must mean something. Look around for documentation.

Hint 2

One of the wires seems to lead to the gear shift.

Solution

Cut the bottom right wire, then use the gear shift to move your car forward and backward.

Objective 3

Access your steering

Hint 1

One of the wires seems to lead to the steering wheel.

Hint 2

Oh no, the steering wheel! Looks like something with a hexagonal head can replace it.

Solution

Cut the top left wire, then replace the steering wheel with the tire iron found below the passenger seat.

Objective 4

Remove the truck’s first fuse

Hint 1

The truck’s back door is electrified. Follow one of the cables to the truck’s back-right side to see a heavy door.

Hint 2

You’ll need something else to lift this door.

Solution

Use the scissor jack from the car’s passenger seat to lift the door, then remove the fuse.

Objective 5

Remove the truck’s second fuse

Hint 1

The truck’s back door is electrified. Follow one of the cables to the truck’s front-right side to see a utility box

Hint 2

Flamethrowers block your path! They must have a fuel tank somewhere.

Hint 3

The fuel tank on the left side is held in place by clamps.

Hint 4

The emergency release clamp has a broken fuse/

Solution

Remove the yellow panels on the truck’s left side with the car’s grappling hook. Then, replace the fuse next to the emergency release lever with a new fuse and pull it. Finish removing the fuel tank with your grappling hook to deactivate the flamethrowers, and get the truck’s front-right fuse.

Objective 6

Remove the truck’s last fuse

Hint 1

The truck’s back door is electrified. Follow one of the cables to the truck’s underside. A security gate blocks your path—they must have controls somewhere.

Hint 2

A box under the truck’s yellow panels seems to control the gate.

Solution

Remove the yellow panels on the truck’s right side with your car’s grappling hook. Then, lower the bottom left panel down into the lowest-left slot. Move the gate panel all the way to the left. Move the horizontal panel down one row, and the other small panel to the top right. Move the gate panel up one to make room to to remove the lower-left panel out of the slot. Move the gate panel into the slot to access its button and raise the shields. Move under the truck to remove the fuse.

Objective 7

Open the truck

Hint 1

The truck’s back door is no longer electrified. It resembles a yellow X.

Solution

Use your grappling hook to latch on to the back of the truck.

Objective 8

Protect your car

Hint 1

You don’t have much time against the robot’s laser. Get him off your hood.

Hint 2

The robot sways as you move the car, maybe he can be knocked off.

Solution

Drive your car to the left to hit the robot with barrels until he falls off your hood.

Objective 9

Stop the explosion

Hint 1

The robot’s front panel seems to be damaged. Maybe it can be opened with a tool.

Hint 2

Dr. Prism’s notes are confusing but helpful. The robot’s dials and switches must change its lights in some way.

Solution

  • Open the robot’s panel by prying it open with a screwdriver

  • Flip the left switch

  • Cut the blue wire

  • Turn the center dial all the way left

  • Flip the left switch back, or wait for it

  • Cut the black wire

  • Turn the right dial until the outer two lights are active

  • Flip the left switch

  • Cut green